TABLE OF CONTENTS

• Overview
• Tools required
• Instructions

Overview

Use these instructions for any of the following use cases:

• Pair a new power meter to the bike
• Set up a replacement upper board
• Set up a replacement handlebar stem and upper board

Tools required

Stages Cycling app installed on a compatible device. 

Instructions

1. Download the Stages Cycling app. If already downloaded, make sure it is the latest version.

• iOS
• Android

2. Open the Stages Cycling app.

3. Select the Device icon and then tap the link icon next to your StagesBike to connect. If your StagesBike does not show up on the Devices screen, tap Add Device.

4. Select or swipe over to the Power meters tab.

5. Spin the cranks on your StagesBike to make sure they are awake. Be sure that all battery tabs have been removed and the batteries are installed correctly and relatively new.

6. Select the Pencil icon to edit the power meter's ANT+ IDs. Enter in the replacement power meter’s ANT+ ID. The ANT+ ID is located on a sticker on the inside edge of your power meter.

8. Select OK and pairing will begin. After pairing is successful, both power meters will display Connected.

9. Once connected, perform a zero reset by hitting the zero reset button.

10. Make sure your crank arms are in the vertical position, then select Start. 

12. After completing the zero reset, exit the app, and your bike is now ready to ride.