- Rotate both blue locking collars—on the drive and non-drive sides—clockwise until they make contact with the black feet.
- Rotate both black rear feet counterclockwise until fully retracted and no longer in contact with the floor, ensuring both the drive-side and non-drive-side blue collars move accordingly.
- Rotate the non-drive side/left black foot clockwise until it contacts the floor. Continue adjusting the foot until the bike is as vertical as possible.
- Rotate the non-drive side (left) blue locking collar counterclockwise until it is snug against the stabilizer to lock the foot in place.
- Rotate the drive-side (right) rear foot clockwise until it makes contact with the floor and the bike’s weight is evenly distributed across both rear feet. Verify that the rear stabilizer’s center rocker is fully in contact with the ground.
- Rotate the drive-side rear blue locking collar counterclockwise until it is snug against the stabilizer, securing the foot in place.
- Verify that both rear feet are firmly contacting the floor and that the bike does not rock side to side. Adjust the feet positions as needed to ensure the bike is vertical.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article